CF-32 Ti Continuous Flow Rotor, 32.000 rpm, 102.000 x g, 430 mL

B10463


In continuous flow centrifugation, solutions are pumped through the rotor continuously while it is spinning in the centrifuge. Particles sediment out of the flowing stream, which then emerges from the rotor as a particle-depleted effluent. This process continues until the particlecontaining capacity of the rotor is reached, or until the starting material (sample) is completely processed. Thus the amount of sample that can be processed in one run is determined by the sample’s volume and concentration of particles.

The CF-32 Ti continuous flow rotor permits the processing of very dilute samples at rates up to nine liters per hour (150 mL/m) and maximum capacity (with core) of 430 mL. Common applications include the large-scale collection of viruses and the sedimentation of bacteria and subcellular fractions. Continuous flow centrifugation is useful whenever particles with sedimentation coefficients of 50 S* or larger must routinely be separated from fluid volumes of two liters or more.

For use in Optima ultracentrifuges

Specifications

Platform Floor Prep
Rotor Type Zonal (Ultracentrifugation)
Maximum RPM 32,000 rpm
k-Factor 42
Nominal Capacity 430.00|mL

Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.